Confirm real profile size, LED bin, connector direction and label before batch work.
LED Strip Manufacturing
Zigzag S Shape LED Strip Wholesale
Flexible PCB path for letters, curves, signs and irregular architectural outlines.
- Voltage, wattage, LED package and PCB structure confirmed before sampling
- Connector, lead wire, profile fit and installation drawing reviewed before quotation
- Certificate, packing label and repeat-order records prepared for wholesale programs
Factory Overview
Zigzag S Shape LED Strip manufacturer in Vietnam.
Zigzag S Shape LED Strip is specified by voltage, wattage per meter, LED density, PCB width, color target, IP rating, cut length, connector type and packaging plan. A distributor sourcing for hotel, retail, cabinet, facade or signage work needs these details before the factory can quote the same structure that will be produced in batch.
For sample approval, confirm installation channel size, expected brightness, viewing distance, dimming or control system, target market and required certificates. This reduces the risk of a sample that looks acceptable but cannot pass mass-production or import requirements.
RFQ checklist
- Voltage and wattage target
- CCT, CRI or color-control requirement
- PCB width, roll length and cut interval
- IP rating and installation environment
- Connector, lead wire and profile fit
- Estimated sample and bulk quantity
Adjust PCB width, silicone profile, CCT, voltage, packing and private label requirements.
Check destination-market certificate scope, origin documents and carton marks before shipment.
Product Definition
What Are Zigzag S Shape LED Strips?
Zigzag S Shape LED Strip refers to a production-ready lighting structure built around LED package, circuit board width, voltage, protection level, connector direction and installation method. For B2B buyers, the useful question is not only the product name; it is whether the supplier can keep the same approved specification through sampling, mass production and repeat orders.
Before quotation, the engineering team should understand the real mounting channel, viewing distance, driver location, control method, operating environment and certificate requirement.
Why Choose Zigzag S Shape LED Strip
Engineering checks that matter before bulk sourcing.
Color and bin control
Confirm CCT, CRI, wavelength or RGB control method before the first sample so the batch target is measurable.
Commercial-grade electrical design
Match voltage, wattage per meter, copper thickness and driver headroom to the installation length.
Certificate route
Check UL, ETL, CE, CB or RoHS document scope against exact model, voltage and destination market.
Factory-direct specification review
Use drawings, photos and target quantity to align PCB, connector, lead wire, profile and packing before production.
Application flexibility
Adapt the product to cabinet, retail, signage, facade, hotel, event or industrial lighting constraints.
Dimming and control integration
Review driver, controller, remote, DMX, SPI or low-voltage dimming compatibility before delivery.
Applications
Application Scenarios
Application context changes the quotation. A cabinet project, facade project and retail display can require different voltage, diffuser, connector, driver and packing decisions even when the product name looks similar.
retail shelving
Confirm installation dimension, viewing distance, wiring path and required certificate before sample production.
hotel coves
Confirm installation dimension, viewing distance, wiring path and required certificate before sample production.
cabinet profiles
Confirm installation dimension, viewing distance, wiring path and required certificate before sample production.
signage channels
Confirm installation dimension, viewing distance, wiring path and required certificate before sample production.
Quick Series Overview
Available specification range before sampling.
Select Product Series
Choose the LED package, output type or installation structure.
01
COB LED Strip
Dotless output for shallow profiles and close-view linear lighting. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
02
SMD2835 LED Strip
High-efficacy general lighting structure with stable thermal path. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
03
SMD2010 LED Strip
Slim replacement route for narrow channels and compact details. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
04
SMD5050 LED Strip
High-output structure for task lighting and larger decorative runs. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
05
SMD3528 LED Strip
Low-power option for ambient and decorative lighting. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
06
SMD3014 Front Emitting LED Strip
Compact high-density front-emitting structure for uniform lines. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
07
SMD3014 Side Emitting LED Strip
Edge-emitting structure for signage, curves and display cases. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
08
SMD2216 LED Strip
High-density micro LED option for premium visual uniformity. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
09
SMD2110 LED Strip
Robust micro LED option for compact channels and repeat orders. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
10
SMD5630 LED Strip
High-power LED package for stronger lumen output. Buyers normally confirm voltage, wattage, CCT or control method, profile fit, IP rating, cable exit and packing method before approving a sample.
Custom IP
Custom waterproof and protection structure.
Zigzag S Shape LED Strip quotation should define whether the product will sit inside an aluminum profile, cabinet groove, facade channel, pool-area detail or outdoor sign structure.
IP20
Bare or low-profile indoor structure for dry aluminum profile installations.
IP54
Thin surface coating for splash-resistant indoor furniture and display projects.
IP65
Silicone or coating protection for humid retail, signage and sheltered outdoor use.
IP67
Stronger sealing route for exterior details where cable exit must be reviewed.
IP68
Wet-location planning where end caps, cable direction and immersion risk must be confirmed.
Dimming System
Driver, controller and remote should be matched before delivery.
A complete Zigzag S Shape Series project may need LED driver, controller, sensor, dimmer, remote or DMX/SPI interface. Confirm load, distance, wiring path and control protocol before mass production.
LED Driver
Voltage, wattage and safety margin.
Controller
PWM, CCT, RGB, SPI or DMX route.
Remote / Sensor
User interface and installation distance.
Connection Diagram
Basic wiring layout for Zigzag S Shape Series systems.
Before shipment, buyers should confirm polarity, driver capacity, connector type, lead wire length, maximum run length and installation access. These details reduce field failures during project installation.
Keep polarity correct
Mark positive and negative wires clearly on sample, label and installation notes.
Match power supply to strip load
Calculate wattage by run length and leave driver headroom for stable operation.
Use suitable connectors
Connector width, current rating and pull strength should match the PCB and job-site wiring path.
Common Failure
Common Failure For Zigzag S Shape LED Strip.
Typical issues often come from mismatched driver capacity, weak soldering, insufficient PCB design, poor sealing or unclear installation details.
Uneven bright or dark areas
Usually linked to voltage drop, wrong feed point, insufficient driver capacity or inconsistent LED bin.
Weak solder joints
Review solder pad size, wire direction, pull strength and sample handling before batch assembly.
Burned pads or PCB damage
Check wattage density, thermal path, copper thickness and profile heat dissipation.
Sealing or coating problems
Confirm IP level, cable exit, end cap and installation environment before mass production.
Specification Table
Information to confirm before quoting.
A clear table helps importers, project contractors and brand owners compare quotations without losing technical details between sample and mass production.
| Voltage | 12V / 24V / 36V / 48V or AC version depending on run length |
|---|---|
| Color / Control | Single CCT, tunable white, CRI target or project color bin |
| Mechanical Fit | PCB width, silicone profile, aluminum channel, cabinet slot or fixture drawing |
| Protection | IP20, IP65, IP67 or IP68 selected by installation environment |
| Sampling | Sample length, connector direction, lead wire, label and packing confirmed before approval |
| Bulk Order Control | Same BOM, same color bin, same carton mark and reorder record for repeat batches |
Technical Matching
Match product structure to the installation constraint.
Close-view cabinet lighting may need COB or high-density layouts. Long facade lines may need 24V, 36V or 48V planning. Wet areas require IP rating, cable exit and end-cap checks before production.
- Cabinet and channel drawings
- Mounting hole or profile compatibility
- Controller and driver interface
- Sample approval before bulk order
Production Control
From sample approval to repeat order.
Zigzag S Shape Series buyers usually need a stable handoff from prototype to batch production. The useful evidence is not one sample photo; it is a recorded process that keeps the same structure across shipments.
Drawing / sample review
Check installation drawings, profile dimensions, target market and expected operating environment.
Prototype build
Confirm LED bin, PCB width, connector direction, diffuser or silicone profile and sample length.
Electrical and appearance checks
Review voltage drop, color consistency, brightness, soldering, sealing and wire pull details.
Batch packing record
Lock reel length, label, carton mark, barcode, certificate file and bulk-order specification.
Looking for a reliable supplier?
Send drawings, channel dimensions, installation photos, target market and certification needs. These details help the engineering team match the LED structure, driver route, connector direction and packing method before a sample is built.
Related Products
More LED Strip options
LED Strip
Single Color Series
Single-CCT and solid-color LED tape for coves, shelves, signage and commercial linear lighting.
View Series >
LED Strip
Tunable White Series
Dual-CCT strip architecture for warm-to-cool projects where installers need scene control.
View Series >
LED Strip
RGBX Change Series
RGB, RGBW and RGBTW strip configurations for hospitality, retail and decorative lighting programs.
View Series >
LED Strip
High Efficiency Series
Lower wattage per meter for projects balancing lumen output, energy rules and thermal load.
View Series >Product FAQ
Questions before sourcing Zigzag S Shape Series.
What details are needed to quote Zigzag S Shape Series?
Send voltage, length, wattage target, CCT or color-control requirement, IP rating, installation drawing, connector direction, sample quantity and bulk estimate.
Can the product be customized for my project?
Yes. The practical customization scope includes PCB width, LED density, cut interval, diffuser or silicone profile, lead wire, connector, label and carton packing.
How do I avoid a sample that cannot scale to mass production?
Approve the sample together with BOM, color bin, cable exit, packing label and certificate scope. The same record should be used for the bulk order.
Which certificates should be checked?
Check the destination market first. Then confirm whether UL, ETL, CE, CB, RoHS or other documents cover the exact model, voltage and product structure.
Can this be supplied as an OEM or private label product?
Private label work normally requires logo files, label size, carton mark, barcode, manual language and packing method before the production plan is finalized.